1-kpl3015-1 kingbright ? package dimensions note: 1. q 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. selection guide notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0 .1(0.004") unless otherwise noted. 3. lead spacing is measured where the lead emerge package. 4. specifications are subjected to change without notice. part no. dice lens type iv (mcd) @ 20 ma viewing angle min. typ. 2q1/2 kpl-3015hd bright red (gap) red diffused 0.8 2 90 kpl-3015hc bright red (gap) water clear 0.8 2 90 kpl-3015ht bright red (gap) red tras. 0.8 2 90 kpl-3015id high efficiency red (gaasp/gap) red diffused 5 16 90 kpl-3015ec high efficiency red (gaasp/gap) water clear 5 16 90 KPL-3015IT high efficiency red (gaasp/gap) red trans. 5 16 90 kpl-3015yd yellow (gaasp/gap) yellow diffused 5 16 90 kpl-3015yc yellow (gaasp/gap) water clear 5 16 90 kpl-3015yt yellow (gaasp/gap) yellow trans. 5 16 90 kpl-3015srd super bright red (gaalas) red diffused 3.2 12.5 90 kpl-3015src super bright red (gaalas) water clear 3.2 12.5 90 kpl-3015srt super bright red (gaalas) red trans. 3.2 12.5 90 kpl-3015sgd super bright green (gap) green diffusesd 40 80 90 kpl-3015sgc super bright green (gap) water clear 40 80 90 kpl-3015sgt super bright green (gap) green trns. 40 80 90 kpl-3015syd super bright yellow (ingaalp) yellow diffusesd 40 80 90 kpl-3015syc super bright yellow (ingaalp) water clear 40 80 90 kpl-3015syt super bright yellow (ingaalp) yellow trns. 40 80 90 3.0x1.5mm smd chip led lamps kpl-3015 description the bright red source color devices are made with gallium phosphide red light emitting diode. the super bright green source color devices are made with gallium phosphide green light emitting diode. the high efficiency red source color devices are made with gallium arsenide phosphide on gallium phosphide orange light emitting diode. the yellow source color devices are made with gallium arsenide phosphide on gallium phosphide yellow light emitting diode. the super bright red source color devices are made with gallium aluminum arsenide red light emitting diodes. the super bright yellow source color devices are made with dh ingaalp on gaas substrate light emitting diode. features l 3.0mmx1.5mm smt led. 1.1mm thickness. l low power consumption. l wide viewing angle. l ideal for backlight and indicator. l various colors and lens types available. l i nner lens type
1-kpl3015-2 parameter bright red high efficiency red yellow super bright red super bright green super bright yellow units power dissipation 105 105 105 100 105 125 mw dc forward current 25 30 30 30 25 30 ma peak forward current [1] 150 150 150 150 150 150 ma reverse voltage 5 5 5 5 5 5 v operating/storage temperature -40 to +85 symbol parameter device typ. max. units test conditions peak wavelength bright red high efficiency red yellow super bright red super bright green super bright yellow 700 625 590 660 565 595 nm if=20ma spectral line halfwidth bright red high efficiency red yellow super bright red super bright green super bright yellow 45 45 35 20 30 20 nm if=20ma capacitance bright red high efficiency red yellow super bright red super bright green super bright yellow 40 12 10 95 45 33 pf vf=0v;f=1mhz forward voltage bright red high efficiency red yellow super bright red super bright green super bright yellow 2.0 2.0 2.1 1.85 2.2 2.0 2.5 2.5 2.5 2.5 2.5 2.4 v if=20ma reverse current all 10 ua vr = 5v electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c i r v f c dl 1/2 l peak c c note: 1. 1/10 duty cycle, 0.1ms pulse width.
1-kpl3015-3 bright red kpl-3015hd, klp-3015hc,kpl-3015ht high efficiency red kpl-3015id, kpl-3015ec, KPL-3015IT
1-kpl3015-4 super bright red kp-l3015srd, kpl-3015src, kpl-3015srt yellow kpl-3015yd, kpl-3015yc, kpl-3015yt
1-kpl3015-5 super bright green kpl-3015sgd, kpl-3015sgc, kpl-3015sgt super bright yellow kpl-3015syd, kp;-3015syc, kpl-3015syt
1-kpl3015-6 kpl-3015 series smt reflow soldering instructions kpl-3015 series recommended soldering pattern kpl-3015 series tape specifications (units : mm)
|
